Kobold Press

Real Steel: The Kiridashi Assassin Bug

Kiridashi assasin bug - right side

The kiridashi is an interesting study. Its original function, probably going back several centuries, was to mark wood. Japanese carpenters still use them today instead of marking pencils. In the form used for their original purpose, the kiridashi is long, slender, and simple. Although there is a sharp edge, the emphasis is on the point, because the knife is held and used like a pencil.

For a knife geek, the original form is interesting enough to warrant some attention, but the kiridashi has undergone enough modern modification and development to be interesting to almost anyone who uses knives.

What It Was

A traditional kiridashi has two fairly unique features that make it very good at its intended purpose. The edge is oriented more towards the front than most knives, and it has what is called a chisel grind. This simply means that there is a bevel on only one side of the blade. As we have discussed before, everything in bladesmithing is a trade-off; to get a particular advantage, the smith usually has to accept a weakness. Chisel grinds gain the advantage of being extremely sharp because the edge can be made extraordinarily thin. This sharpness can be enhanced further by using a hollow grind, which makes the edge even thinner. As an example, straight razors typically have a hollow chisel grind. For the kiridashi, the payback for that incredible sharpness is doubled; the thin blade is fragile, which is expected, but the knife is also “handed,” meaning that it is intended to be used by either a right or left handed person depending on which side the bevel is located.

Popular knife culture has seized on this knife, and it has become something more…

What It Is Now

Close up of compound eye and right handed edge bevel

Knifemakers and bladesmiths have made as many versions of this knife as there are makers and smiths. There are traditional, tactical, utility, hunter, and skinner kiridashi. In my opinion, these knives excel at only two categories: marking and general utility. I’ve included a picture of some of the kiridashi I use in my shop and around the house alongside the featured piece for comparison. I really like these knives in their utility capacity: box cutters; string, rope, and wire cutters; I even use them to mark metal and carve wood. I love the general form so much I wanted to do a pure fantasy art piece just for KQ.

The Death Bug

This little knife was made from 1084 carbon steel. I didn’t do a sketch or make a mock up from wood or Plexiglas as I usually do when designing a new knife. I simply band sawed a piece off the bar and went to the belt grinder. No fancy hand tools and no finesse. I just let the metal tell me what it wanted to be, and I ground away everything that didn’t belong. After the general shape was right and the edge bevel ground, I used my drill press to make the eyehole. Hardening and tempering came next, and then I painted the stripe pattern with a resist and gave it a long bath in ferric chloride. I then inserted the brass-mosaic-pin compound “eye” and ground it flush. The stand is made from black walnut (sorry if it’s weak, I’m not a woodworker…) and the legs are brass pins. DONE!

The Game Stats

The featured piece and my personal kiridashi

I’d love for this knife to be gamed up. At this point, I hand it over to the game writers and players to receive appropriate stats and uses. I see it as a golem like non-intelligent construct or perhaps as an artificial life form, either individual with animal intelligence or in a hive with the appropriate hive intelligence.

In fact, email web editor Scott—scott[at]koboldquarterly[dot]com—your statted “death bug” as whatever kind of monster or item (of any edition) that you want by March 1, and the best one will be posted.

Have fun with it!

13 Replies to "Real Steel: The Kiridashi Assassin Bug"

Todd the Bladesmith

February 10, 2011 at 9:08am

I just spoke to Wolfgang about sweetening the deal a bit; the writer of the best stats gets posted AND wins the bug.

No purchase necessary. The bug will only be shipped to an adult 18 or older.

Let the submissions begin!

Darkjoy

February 10, 2011 at 9:24am

Sweet!

I’ll see what I can whip up, might be a good exercise for the inevitable King of the Monsters 3 AND I want my very own death bug.

Todd the Bladesmith

February 10, 2011 at 10:14am

@Darkjoy – That’s why we all need to post comments. I hadn’t thought about KOTM, but because you brought it up I have three or four ideas for new projects.

We get some of our best ideas from each other, the more we talks the smarter we gets.

:)

Adam Daigle

February 10, 2011 at 2:03pm

Bugs, blades, and monsters!? What’s not to love?

Darkjoy

February 13, 2011 at 2:55pm

And I am in, one wicked little monster is now tearing up Scott’s inbox.

Todd the Bladesmith

February 13, 2011 at 5:07pm

@Adam Daigle – Me hopes you’ll be submitting something…

@Darkjoy – I look forward to reading it. Scott installed mithril in his inbox just for this one, no worries.

Sam Hing

February 15, 2011 at 4:33pm

I sent one in..the picture just flowed into a monster..nice work

Todd the Bladesmith

February 15, 2011 at 4:36pm

@Sam Hing – Thanks for the compliment and for the submission!

nermal2097

February 17, 2011 at 5:06am

Yep this is definitely more a creature than an item. Mine has been sent now.

Todd the Bladesmith

February 17, 2011 at 5:40am

@nermal2097 – Schveet. I’m really looking forward to seeing what comes out of this.

Nic Quimby

February 18, 2011 at 7:38am

I just stumbled onto this; do you guys know when you’ll stop taking submissions?

Todd the Bladesmith

February 18, 2011 at 8:27am

@Nic Quimby – You’ve got time. March 1st is the deadline. Good luck.

Nic Quimby

February 18, 2011 at 9:08am

Cool!

Switch to our mobile site